Cut the foam and batting to size and lay it on the top of the trunk lid. You’ll need foam a little larger than your bench’s surface, and batting and fabric twice the size.
Here's a quick video on upholstering (or reupholstering) a bench.the full article, which includes more information about the project, plus some tips and inst.
How to upholster a bench lid. Place the bench lid on top of the foam and trace the lid with a marker. Mark where the hinges need to be as well. I used foam that was 1 ½ inches thick.
Using the screw driver, remove the bench top from the hinges. One of the simple ways to handle the corner upholstery is to fold the corners in a gift wrap style, the same as wrapping a package. So, i just sort of lined the seat up.
I did it this way so i would have a nice clean edge on the front lip of the lid. Place the bench lid on top of the foam and trace the lid with a marker. Make sure to put the screws in a safe place like a plastic baggie or cup so you don't lose them.
Then i flipped the fabric over and brought it underneath the lid. How to upholster a bench lid. Put the screws in a plastic bag and tape them to the piece you are working on.
The final step to reupholster a bench is to attach your newly covered bench seat to the frame. Cut the foam with your scissors. I used 1 ½ inch foam because it was what i had on hand.
Mark the spots with a pencil on the bottom of the trunk lid. The problem with the way i covered the bench seat is that there is a lot of material in each corner that covers the original holes. Using a drill fitted with a drill bit, drill holes in the lid where your pencil marks are.
I lined up the edge of the fabric (wrong side up) with the front edge of the lid and then stapled all along the edge. (no need to measure, just fold it up to determine what you’ll need.) allow a couple inches of excess fabric so you can fold it over before stapling it down. And that’s how to upholster a storage bench.
Then, cut the foam to the size of your bench’s. The thickness of the foam is your preference. Make sure to account for the foam.
Cut your batting 3 inches wider than the bench lid. Being cautious not to pull too hard, begin stapling the fabric and batting to the wood so that it is taut across the lid. Remove the screws carefully and the top will come off.
Cut your batting 3 inches wider than the bench lid. Cut the foam with your scissors.step 3: It is a good idea to put a small letter f on the front.
How to upholster a bench lid. If you want to make a soft seat for your bench, you can upholster it with some simple tools. Feel with your hands and locate the screw holes for the lid mechanism.
She has written sewing eguides and patterns, been a featured teacher at rebecca page’s sewing summit and jennifer maker’s holiday maker fest and. The first step is to open the chest and locate the screws that are holding on the top pad. One of the most common questions i get is, “how do i upholster a bench?” i always practically scream, “it is soooo easy!!” i have helped dozens of people with this task.
Once you can upholster a lid, you can upholster a seat, a bench, an ottoman and even a headboard. (no need to measure, just fold it up to determine what you’ll need.) allow a couple inches of excess fabric so you can fold it over before stapling it down. First, remove your bench’s legs so you can wrap the bench fully.
Using the screw driver, remove the bench top from the hinges. Align the center marks of the lid and the piano hinge. Elizabethmadethiselizabeth farr is the writer behind the elizabeth made this blog where she shares helpful sewing tips, step by step sewing tutorials and videos to help you explore your creativity through sewing.
If you want to make a soft seat for your bench, you can upholster it with some simple tools. Staple opposite sides rather than around (that is, do the right side and then the left, rather than right, bottom, left, top), pulling as you go. Put the screws in a plastic bag and tape them to the piece you are working on.
Lid on recovered storage bench. Include the thickness of the lid in your measurements and add another 2 inches.lay the piece of fabric on the floor, and turn the bench over on the fabric.lift up the seat cushion to reveal lots of storage underneath. Poke through the holes with an awl, then mark each hole with an x with your chalk.
Align the center marks of the lid and the piano hinge. I placed mine in the shape of one big x. Reassemble the hinges, lid mechanism, and the feet, adding the screws back to where they should go.
On mine there were eight screws to remove. Cut your fabric to size and iron it. Place the bench lid on top of the foam and trace the lid with a marker.